The 360 fit really nice. Used the 360's manifolds with a y pipe I found on Jeg's or Summit.Running single 2.5 inch pipe with a big Magnaflow round muffler. I had to notch the bellhousing for the crank position sensor but overall not a bad swap. The engine has plenty of power. In first or reverse I can let out the ctutch and the truck moves with no throttle. It really needs another gear so I am going down the NV4500 rabbit hole. The 205 transfer case in this truck is divorced so I will be using a 2wd Chevy NV4500. It has a short tailshaft. Going to have to modify the tranny mount and do a little driveshaft work but shouldn't be too bad. I have the tranny and a gas bellhousing and hydraulic pedals are on the way.Here's some before pics.