Originally Posted by Sniper
Originally Posted by Magnum
Since the factory has too much yoke clearance on most cars. I would be tempted to try the longer driveshaft and check for clearance. Most literature will tell you 1.5" of clearance but most of the time that is more than necessary.

If a car sits low and there is very little clearance like 3/4". It will never get closer as the car's suspension compresses, only further.


What do you think happens when the pinion goes from pointing down to pointing up under acceleration?


The rear transmission housing can fail.

Last edited by Alaskan_TA; 07/29/19 02:24 PM.