Thanks for the tech support on this.

Just did the fuel flow test into 5 gal bucket. Measured the fuel flow on the final connection into the carb. It took 3 minutes and 45 seconds to flow 5 gallons. This comes out to only 45 gph. Please check my math on this to be sure I am correct. This surprised me since the pump is rated at 110 gph. I thought it would do at least 60 gph.

The fuel filter is currently located between the regulator and the carb. I am going to relocate it to between the pump and the regulator and repeat the test. I will report back later this afternoon or evening.

Thanks,

Roger