Originally Posted by YO7_A66
""that solid rollers used on the street should not be subjected to extended idleing as they do not get enough oil splash feed on them""

Is this why I have read that the solid rollers need to idle at a higher rpm than the hydraulics?



With pressure feed lifters you don't need to worry about oiling at idle but the "good" setup is expensive though twocents
Here is a good link https://www.dragzine.com/tech-stori...ery-out-of-bushing-style-roller-lifters/
Gus beer

Last edited by fourgearsavoy; 07/04/19 07:15 PM.
64 Plymouth Savoy
493 Indy EZ's by Nick at Compu-Flow
5-Speed Richmond faceplate Liberty box
Dana 60