8 inch Torque Converters - Moparts Forums

Register Log In Moparts Forums Unlawfl's Race & Engine Tech 8 inch Torque Converters

Print Thread

Re: 8 inch Torque Converters [Re: hemi-itis] #2651647 05/03/19 05:26 PM 05/03/19 05:26 PM
Joined: May 2016 Posts: 112 Mopar Jason B member
Jason B member Joined: May 2016 Posts: 112 Mopar	Depends on who built it and if they will stand behind it. They should be able to fix it and upgrade where needed. Only question will be is if it’s cost effective as opposed to buying new that’s already beefed up. Jason 1968 Cuda 440" Edelbrock Victor Head Small Block. [img]https://board.moparts.org/ubbthreads/upload4/23859.png[/img]

Entire Thread
Subject	Posted By	Posted
8 inch Torque Converters	Sammy	05/02/19 04:36 PM
Re: 8 inch Torque Converters	MR_P_BODY	05/02/19 04:43 PM
Re: 8 inch Torque Converters	CMcAllister	05/02/19 05:28 PM
Re: 8 inch Torque Converters	pittsburghracer	05/02/19 04:47 PM
Re: 8 inch Torque Converters	fast68plymouth	05/02/19 05:23 PM
Re: 8 inch Torque Converters	Just-a-dart	05/02/19 11:36 PM
Re: 8 inch Torque Converters	Cab_Burge	05/02/19 11:40 PM
Re: 8 inch Torque Converters	J_BODY	05/03/19 01:32 AM
Re: 8 inch Torque Converters	slantzilla	05/03/19 02:39 AM
Re: 8 inch Torque Converters	Dave Hall	05/03/19 03:53 AM
Re: 8 inch Torque Converters	LA360	05/03/19 06:25 AM
Re: 8 inch Torque Converters	Jason B	05/03/19 11:55 AM
Re: 8 inch Torque Converters	hemi-itis	05/03/19 01:37 PM
Re: 8 inch Torque Converters	Bad340fish	05/03/19 03:15 PM
Re: 8 inch Torque Converters	dvw	05/03/19 03:27 PM
Re: 8 inch Torque Converters	Jason B	05/03/19 09:26 PM
Re: 8 inch Torque Converters	hemi-itis	05/09/19 02:29 PM
Re: 8 inch Torque Converters	340Cuda	05/09/19 02:32 PM
Re: 8 inch Torque Converters	MR_P_BODY	05/09/19 03:29 PM
Re: 8 inch Torque Converters	Cab_Burge	05/09/19 03:40 PM
Re: 8 inch Torque Converters	hemi-itis	05/10/19 03:35 AM

Moderated by Al_Alguire, Hotwheelsjr, moparts, not_a_charger, RangerDan440, tboomer

Hop To

Powered by UBB.threads™ PHP Forum Software 7.7.1