I'm redoing a 68 Road Runner and trying to mock up and fit my panels. These outer wheel houses fit awful. The flange is no where close to the original. I was wondering maybe if AMD designed these to be a repair part instead of a replacement? The flange has an offset and I've seen at least one article where these were installed with the flange to the outside of the inner panel. The inner wheel houses fit pretty darn good from what I can tell, just clamped in place. All my AMD metal so far other than these outers has fit nice. Any thoughts?
I know there were a few fitment issues with original/early releases of the B body and Charger outer wheelhouse wells, are your purchases recent?, and directly from AMD? or another vendor?, are you sure you have the right PN/application/part(s)?
I have installed the AMD 68-70 Dodge Charger and Coronet outer wheelhouses, and the fitment was darn near perfect. The alignment holes on the flange even matched up to the inner wheelhouses holes perfectly. The flange to the quarter and the flange of the quarter always need a little tapping here and there, to match up perfectly, even on OEM parts.
I have also installed the Plymouth outers with no issues.
