Wow I didn't know I'd get more responses on this thread. I was just bumping this for my buddy cause he wanted the info.

Who makes the ball joints for front steer with ackerman corrected?

The car drives great! Had a little bump steer issue but got that fixed. Still can't hold it on the street very well You need two clear lanes to put it to the floor...

Also I did not switch ball joints from side to side. I just cut the steering arm off the back and welded it on the front.

For some of you reading this for the first time, glad that you learned something from this thread. If you didn't notice I knew nothing about suspension when I started this thread and learned very quickly (the hard way) about how suspension works...