318 LM and poly cranks and Poly cylinder walls

Print Thread

Re: 318 LM and poly cranks and Poly cylinder walls [Re: Retroboy] #2612504 01/26/19 12:20 PM 01/26/19 12:20 PM
Joined: Dec 2009 Posts: 284 STL ,MO H Handygun enthusiast
Handygun enthusiast H Joined: Dec 2009 Posts: 284 STL ,MO	We bandsawed some up awhile back IIRC there were some areas close to water in the chamber but if la is the same then I only see advantages with the poly.

Entire Thread
Subject	Posted By	Posted
318 LM and poly cranks and Poly cylinder walls	Retroboy	01/26/19 05:52 AM
Re: 318 LM and poly cranks and Poly cylinder walls	Pacnorthcuda	01/26/19 07:11 AM
Re: 318 LM and poly cranks and Poly cylinder walls	Twostick	01/26/19 02:05 PM
Re: 318 LM and poly cranks and Poly cylinder walls	jcc	01/26/19 06:03 PM
Re: 318 LM and poly cranks and Poly cylinder walls	Handygun	01/26/19 02:41 PM
Re: 318 LM and poly cranks and Poly cylinder walls	earlymopar	01/26/19 03:58 PM
Re: 318 LM and poly cranks and Poly cylinder walls	Handygun	01/26/19 04:20 PM
Re: 318 LM and poly cranks and Poly cylinder walls	polyspheric	01/26/19 04:34 PM
Re: 318 LM and poly cranks and Poly cylinder walls	A/MP	01/26/19 05:27 PM

Hop To