318 LM and poly cranks and Poly cylinder walls

Print Thread

Re: 318 LM and poly cranks and Poly cylinder walls [Re: Retroboy] #2612459 01/26/19 10:05 AM 01/26/19 10:05 AM
Joined: May 2003 Posts: 6,569 Downtown Roebuck Ont Twostick Still wishing...
Twostick Still wishing... Joined: May 2003 Posts: 6,569 Downtown Roebuck Ont	My understanding is a poly can be bored .100" without issue. A sonic check would confirm for you. Kevin

Entire Thread
Subject	Posted By	Posted
318 LM and poly cranks and Poly cylinder walls	Retroboy	01/26/19 05:52 AM
Re: 318 LM and poly cranks and Poly cylinder walls	Pacnorthcuda	01/26/19 07:11 AM
Re: 318 LM and poly cranks and Poly cylinder walls	Twostick	01/26/19 02:05 PM
Re: 318 LM and poly cranks and Poly cylinder walls	jcc	01/26/19 06:03 PM
Re: 318 LM and poly cranks and Poly cylinder walls	Handygun	01/26/19 02:41 PM
Re: 318 LM and poly cranks and Poly cylinder walls	earlymopar	01/26/19 03:58 PM
Re: 318 LM and poly cranks and Poly cylinder walls	Handygun	01/26/19 04:20 PM
Re: 318 LM and poly cranks and Poly cylinder walls	polyspheric	01/26/19 04:34 PM
Re: 318 LM and poly cranks and Poly cylinder walls	A/MP	01/26/19 05:27 PM

Hop To