I just got home. We had our challenges. My 2 1/8" tube headers hit the dyno frame so I had to use a set of 2" fender wells I took along so the exhaust ports measure 2.150 across on a 2" tube. That couldn't be helping things. To top it off my pro systems 1050 was giving us a fit and when I went to the truck the box I grabbed out of the garage didn't have the SV1. yup! 1 1/2 south in Baltimore... Ugg anyways after bolting on the dyno tuners 1150 dominator she made 865hp @ 7200 and 760 lbs tq @ 5800. I will post the dyno sheet with all the pulls once I get it. It's being emailed and I haven't got it yet. The motor is making really good power from basically 5200 - 7400. It was above 700 lbs torque @ 4800 and climbed from there. I'm thinking my good headers a carb that works and a vacuum pump and I'll be at 900. Anyways... I'll post the sheet once I get it. Thanks for all the interest.