Factory original 15x7 4.25 BS. I think that is the BS, need to check.
Original factory UCA's
Bump stops and everything is install. Have not done the alignment yet.
When raised in the air can turn the wheels but when I drop it on the ground then they hit.
I do have the T/bar up a bit too much.
So Steve you have ran this setup?
With cop rims, yes. They have the same 15x7 backspacing.
And I’ve run it with 15x8 rallyes I had made with 4 1/2 backspacing. Those had aftermarket outer hoops. But I was never close with the 15x7’s.
