The adjusters are screwed in flush with the LCA plates with the 0.960 bars so it wouldn't hurt me to go one step larger to a 1.00 bar. That would give me a few more threads of adjustment.

I weighed the Coronet and it is 3800 lbs without driver. 50/50 weight distribution. So that is 1900 lbs on the front end which means a 190 lb/inch front spring rate would work.

I haven't tried different settings on the Koni shocks yet. I installed them with the adjustment in the middle of the range and they seem to be working fine so I'll probably leave it for now.