383 build need to use adjustable rockers

Print Thread

Re: 383 build need to use adjustable rockers [Re: Cab_Burge] #2486991 04/23/18 10:19 PM 04/23/18 10:19 PM
Joined: Jan 2007 Posts: 7,664 IN A ahy master
ahy master A Joined: Jan 2007 Posts: 7,664 IN	I used Comp "pro magnum" cast alloy steel rockers. Pushrods were set so about 1 1/2 threads showed... as desired. Geometry was good. I did use MP cast Al black valve covers. I do not know if these have more or less clearance vs stock covers.

Entire Thread
Subject	Posted By	Posted
383 build need to use adjustable rockers	Tommy The Chryco	04/23/18 12:14 PM
Re: 383 build need to use adjustable rockers	carter	04/23/18 04:18 PM
Re: 383 build need to use adjustable rockers	Cab_Burge	04/23/18 06:36 PM
Re: 383 build need to use adjustable rockers	Black_Bee	04/23/18 10:12 PM
Re: 383 build need to use adjustable rockers	R/T1968R/T	04/24/18 12:05 AM
Re: 383 build need to use adjustable rockers	Cab_Burge	04/24/18 12:15 AM
Re: 383 build need to use adjustable rockers	ahy	04/24/18 02:19 AM
Re: 383 build need to use adjustable rockers	PurpleBeeper	04/24/18 03:38 AM
Re: 383 build need to use adjustable rockers	BSB67	04/24/18 04:02 AM

Hop To