Milling pockets in pistons

Print Thread

Re: Milling pockets in pistons [Re: mopfried] #2458546 02/27/18 07:47 PM 02/27/18 07:47 PM
Joined: Oct 2003 Posts: 3,698 NE Oklahoma V Von master
Von master V Joined: Oct 2003 Posts: 3,698 NE Oklahoma	Call rebco machine, think he is Wichita. He cut deeper pockets in two sets of my pistons. He does great work. 72 RR, Pump gas 440, 452s, 3800 lbs, Corked, ET Radials,. 11.33@117.72. Same car, bone stock 346s, 9.5 comp, baby solid. 12.24@110.

Entire Thread
Subject	Posted By	Posted
Milling pockets in pistons	mopfried	02/26/18 03:43 AM
Re: Milling pockets in pistons	steve660	02/26/18 03:50 AM
Re: Milling pockets in pistons	polyspheric	02/26/18 04:13 AM
Re: Milling pockets in pistons	mopfried	02/26/18 04:25 AM
Re: Milling pockets in pistons	440_Offroader	02/26/18 04:49 AM
Re: Milling pockets in pistons	Sport440	02/26/18 05:13 AM
Re: Milling pockets in pistons	Blucuda413	02/26/18 05:02 AM
Re: Milling pockets in pistons	madscientist	02/26/18 05:25 AM
Re: Milling pockets in pistons	Pacnorthcuda	02/26/18 05:36 AM
Re: Milling pockets in pistons	mopfried	02/26/18 06:01 AM
Re: Milling pockets in pistons	polyspheric	02/26/18 07:10 AM
Re: Milling pockets in pistons	mopfried	02/26/18 04:18 PM
Re: Milling pockets in pistons	Sport440	02/27/18 03:53 AM
Re: Milling pockets in pistons	mopfried	02/27/18 01:05 AM
Re: Milling pockets in pistons	dizuster	02/27/18 10:08 PM
Re: Milling pockets in pistons	Von	02/27/18 11:47 PM
Re: Milling pockets in pistons	Stanton	02/28/18 12:19 AM
Re: Milling pockets in pistons	mopfried	02/28/18 01:02 AM
Re: Milling pockets in pistons	mopfried	02/28/18 04:09 AM
Re: Milling pockets in pistons	mopfried	02/28/18 03:44 PM
Re: Milling pockets in pistons	mopfried	03/01/18 01:48 AM
Re: Milling pockets in pistons	Sport440	03/01/18 03:32 AM
Re: Milling pockets in pistons	dizuster	03/01/18 04:05 AM
Re: Milling pockets in pistons	mopfried	03/01/18 06:39 AM
Re: Milling pockets in pistons	dizuster	03/01/18 06:37 PM
Re: Milling pockets in pistons	mopfried	03/01/18 07:13 PM
Re: Milling pockets in pistons	dizuster	03/01/18 10:44 PM

Moderated by Al_Alguire, Hotwheelsjr, moparts, not_a_charger, RangerDan440, tboomer

Hop To