Hemi solid mech./solid roller cams ?

Print Thread

Re: Hemi solid mech./solid roller cams ? [Re: HOTHEMI] #2434729 01/14/18 11:59 PM 01/14/18 11:59 PM
Joined: Aug 2003 Posts: 43,308 Bend,OR USA C Cab_Burge I Win
Cab_Burge I Win C Joined: Aug 2003 Posts: 43,308 Bend,OR USA	On your deal I would buy and use the Comp Cams282S grind, part number 24-308-4, and install it at 103 to 105 intake lobe center and use the lash as recommended, maybe experiment with both .004 to .006 tighter and looser to see what sound and driving you like the most All the stock street hemi cams with mechanical lifters, 1966 to 1969, had .028 hot recommended lash Tightening them up .006 to .012 made them a lot quieter and helped the bottom end power Last edited by Cab_Burge; 01/15/18 12:01 AM. Mr.Cab Racing and winning with Mopars since 1964. (Old F--t, Huh)

Entire Thread
Subject	Posted By	Posted
Hemi solid mech./solid roller cams ?	HOTHEMI	01/14/18 03:38 PM
Re: Hemi solid mech./solid roller cams ?	DaveRS23	01/14/18 05:24 PM
Re: Hemi solid mech./solid roller cams ?	Dragula	01/14/18 05:26 PM
Re: Hemi solid mech./solid roller cams ?	HOTHEMI	01/14/18 07:10 PM
Re: Hemi solid mech./solid roller cams ?	justinp61	01/14/18 10:13 PM
Re: Hemi solid mech./solid roller cams ?	DaveRS23	01/15/18 01:35 AM
Re: Hemi solid mech./solid roller cams ?	71birdJ68	01/14/18 07:44 PM
Re: Hemi solid mech./solid roller cams ?	Hemi_Joel	01/14/18 09:49 PM
Re: Hemi solid mech./solid roller cams ?	HOTHEMI	01/14/18 11:03 PM
Re: Hemi solid mech./solid roller cams ?	rowin4	01/15/18 03:47 AM
Re: Hemi solid mech./solid roller cams ?	hemi-itis	01/15/18 03:21 AM
Re: Hemi solid mech./solid roller cams ?	hemi-itis	01/15/18 03:23 AM
Re: Hemi solid mech./solid roller cams ?	Cab_Burge	01/15/18 03:59 AM
Re: Hemi solid mech./solid roller cams ?	cudaman1969	01/15/18 04:24 AM
Re: Hemi solid mech./solid roller cams ?	Cab_Burge	01/15/18 09:20 AM
Re: Hemi solid mech./solid roller cams ?	383man	01/15/18 09:46 AM
Re: Hemi solid mech./solid roller cams ?	an8sec70cuda	01/16/18 04:06 PM

Hop To