Hemi solid mech./solid roller cams ?

Print Thread

Re: Hemi solid mech./solid roller cams ? [Re: HOTHEMI] #2434699 01/14/18 11:21 PM 01/14/18 11:21 PM
Joined: Dec 2007 Posts: 12,592 Great Neck,LI,new york hemi-itis I Live Here
hemi-itis I Live Here Joined: Dec 2007 Posts: 12,592 Great Neck,LI,new york	Me thinks the required spring pressures determine the life of the lifter.I found out the hard way.I'm on the same set of comp 848's since March of 04.Rebuilt for the second time last winter. My lift is mid 6s with spring pressure low 600lbs over the nose in a street driven hemi that sees over 1000 miles a year and if I'm lucky,,,,,60 passes. HEMI-ITIS has no cure. My condition is fully BLOWN!!

Entire Thread
Subject	Posted By	Posted
Hemi solid mech./solid roller cams ?	HOTHEMI	01/14/18 03:38 PM
Re: Hemi solid mech./solid roller cams ?	DaveRS23	01/14/18 05:24 PM
Re: Hemi solid mech./solid roller cams ?	Dragula	01/14/18 05:26 PM
Re: Hemi solid mech./solid roller cams ?	HOTHEMI	01/14/18 07:10 PM
Re: Hemi solid mech./solid roller cams ?	justinp61	01/14/18 10:13 PM
Re: Hemi solid mech./solid roller cams ?	DaveRS23	01/15/18 01:35 AM
Re: Hemi solid mech./solid roller cams ?	71birdJ68	01/14/18 07:44 PM
Re: Hemi solid mech./solid roller cams ?	Hemi_Joel	01/14/18 09:49 PM
Re: Hemi solid mech./solid roller cams ?	HOTHEMI	01/14/18 11:03 PM
Re: Hemi solid mech./solid roller cams ?	rowin4	01/15/18 03:47 AM
Re: Hemi solid mech./solid roller cams ?	hemi-itis	01/15/18 03:21 AM
Re: Hemi solid mech./solid roller cams ?	hemi-itis	01/15/18 03:23 AM
Re: Hemi solid mech./solid roller cams ?	Cab_Burge	01/15/18 03:59 AM
Re: Hemi solid mech./solid roller cams ?	cudaman1969	01/15/18 04:24 AM
Re: Hemi solid mech./solid roller cams ?	Cab_Burge	01/15/18 09:20 AM
Re: Hemi solid mech./solid roller cams ?	383man	01/15/18 09:46 AM
Re: Hemi solid mech./solid roller cams ?	an8sec70cuda	01/16/18 04:06 PM

Hop To