I hope this can be fixed but probably not:

Print Thread

Re: I hope this can be fixed but probably not: [Re: ric3xrt] #2419653 12/16/17 11:24 PM 12/16/17 11:24 PM
Joined: Jun 2003 Posts: 9,225 Charleston S sixpackgut Drag Week Mod Champion
sixpackgut Drag Week Mod Champion S Joined: Jun 2003 Posts: 9,225 Charleston	I have cast iron plates for my press. Someone was using my press and broke one!!! I mig welded it. Its been holding up fine but I think a machine shop can fix it Gen 3 power 6.22@110, 9.85@135 Follow @g3hemiswap on instagram performance only racing, CRT, ultimate converter, superior design concepts, ThumperCarbs

Entire Thread
Subject	Posted By	Posted
I hope this can be fixed but probably not:	hudsonhornet7x	12/16/17 09:09 PM
Re: I hope this can be fixed but probably not:	ric3xrt	12/16/17 10:02 PM
Re: I hope this can be fixed but probably not:	sixpackgut	12/17/17 03:24 AM
Re: I hope this can be fixed but probably not:	GoodysGotaCuda	12/17/17 04:38 AM
Re: I hope this can be fixed but probably not:	dogdays	12/18/17 11:22 PM
Re: I hope this can be fixed but probably not:	ric3xrt	12/19/17 01:18 AM
Re: I hope this can be fixed but probably not:	EchoSixMike	12/17/17 04:37 AM
Re: I hope this can be fixed but probably not:	Medlock51	12/21/17 10:40 PM
Re: I hope this can be fixed but probably not:	EchoSixMike	12/23/17 05:10 AM
Re: I hope this can be fixed but probably not:	5280Dart	12/24/17 07:39 AM
Re: I hope this can be fixed but probably not:	Medlock51	12/26/17 06:23 PM
Re: I hope this can be fixed but probably not:	Medlock51	12/26/17 06:45 PM
Re: I hope this can be fixed but probably not:	hudsonhornet7x	12/26/17 07:41 PM
Re: I hope this can be fixed but probably not:	justinp61	01/06/18 05:38 PM
Re: I hope this can be fixed but probably not:	BradD	02/12/18 10:14 PM
Re: I hope this can be fixed but probably not:	Dragula	02/13/18 03:29 AM
Re: I hope this can be fixed but probably not:	hudsonhornet7x	02/13/18 03:35 AM
Re: I hope this can be fixed but probably not:	Dragula	02/13/18 04:52 AM

Hop To