Originally Posted By DAYCLONA
Originally Posted By cudaerik
So there is no prying or anything like that after the two Allen head bolts are removed? is it a rod with a ball on the underside of the shifter tower that goes into a cup on the [censored] dogs?




Yes...very simple, nothing to be afraid of, the shift tower will even work/function if you install it 180 degrees off, but it will put the tower nub flat on the passenger side and offset the shifter handle towards the passenger side
Finally bought an app to make pics smaller. Install was pretty easy. There was some extensive tunnel mods., we cut out the 4 speed hump and rolled the metal to fit. They are templates to help. non original 4 speed car. I Have to use an E-body shifter.

A370810D-C5A1-4B88-8028-AC0F3FD9A4B1.jpeg1982FE85-5C08-42F7-B0AE-C133C00D5D1F.jpeg5367C3C4-23CB-42DB-A119-483F319578A7.jpeg349F6A60-F119-440E-9509-7217D42F5019.jpeg