can you weaken one or both of the springs to get it to come in earlier (2800-3000) that you wanted. How is the rotor phaseing now compared to where it was with the faster curve (if the vac adv amt was changed) in addition to the springs.
The rotor phasing is still good, a lot of the rough spot I was feeling was the advance rate being too quick. I put one black spring in and one silver spring in which starts the advance rate at 1600 and is all in by 3400-3500.
I guess the thing to do would be to try the lightest spring in the summit brand spring kit that I have along with the Black firecore spring and see where the advance rate ends up with that combo.
It’s alot smoother it just lost a little response down low, I think it would tolerate all in by 2800-3000 with 14 degrees of mechanical advance.
It’s just gonna take playing with the different springs to see if I can find that combo.
