a MINIMAL touch will make a huge difference. You'll notice it.

is a trial and error process... bend, readjust screw, aply vacuum, bend, readjust screw... sometimes will requiere to get it back and try again.

IF POSIBLE hold with vicegrips the magnet section of the brackets to be sure the magnet won't get loose from the assembly or get a gap there being the bracket bent. It needs to be bend out of the magnet area ( yellow circle )

YES IS TRICKY AND NEEDS PATIENTE!!! will require dissasembly many times as necesary. Reluctor is easy to be installed and reinstalled many times as needed to get room to the vicegrips.


pickup coil bracket job.jpg
Last edited by NachoRT74; 07/15/17 11:17 PM.

With a Charger born in Chrysler assembly plant in Valencia, Venezuela