Any problem boring 060" over?

Print Thread

Re: Any problem boring 060" over? [Re: 70Cuda383] #2231546 01/10/17 12:53 PM 01/10/17 12:53 PM
Joined: Mar 2008 Posts: 73 Sunny South N Noah Zarq OP member
Noah Zarq OP member N Joined: Mar 2008 Posts: 73 Sunny South	Originally Posted By 70Cuda383 Is that pitting down low? Might be what broke the oil ring? Yes it is. Very shallow, but there's lots of little pits. This is the cylinder that had the oily spark plug.

Entire Thread
Subject	Posted By	Posted
Any problem boring 060" over?	Noah Zarq	01/07/17 06:35 AM
Re: Any problem boring 060" over?	OzHemi	01/07/17 06:37 AM
Re: Any problem boring 060" over?	Kern Dog	01/07/17 06:56 AM
Re: Any problem boring 060" over?	Noah Zarq	01/07/17 07:24 AM
Re: Any problem boring 060" over?	Cab_Burge	01/07/17 08:44 AM
Re: Any problem boring 060" over?	70Cuda383	01/07/17 02:21 PM
Re: Any problem boring 060" over?	Challenger 1	01/07/17 03:20 PM
Re: Any problem boring 060" over?	cudaman1969	01/07/17 06:25 PM
Re: Any problem boring 060" over?	Noah Zarq	01/07/17 06:32 PM
Re: Any problem boring 060" over?	Challenger 1	01/07/17 07:43 PM
Re: Any problem boring 060" over?	Noah Zarq	01/08/17 12:41 AM
Re: Any problem boring 060" over?	dvw	01/07/17 04:07 PM
Re: Any problem boring 060" over?	John_Kunkel	01/08/17 12:51 AM
Re: Any problem boring 060" over?	Twostick	01/08/17 04:01 AM
Re: Any problem boring 060" over?	6PakBee	01/08/17 02:54 PM
Re: Any problem boring 060" over?	Tempest	01/08/17 05:14 PM
Re: Any problem boring 060" over?	Challenger 1	01/09/17 11:12 PM
Re: Any problem boring 060" over?	NANKET	01/08/17 04:15 AM
Re: Any problem boring 060" over?	Noah Zarq	01/09/17 09:10 PM
Re: Any problem boring 060" over?	RapidRobert	01/08/17 05:27 PM
Re: Any problem boring 060" over?	Tempest	01/08/17 09:14 PM
Re: Any problem boring 060" over?	dogdays	01/09/17 04:34 AM
Re: Any problem boring 060" over?	Noah Zarq	01/10/17 04:57 AM
Re: Any problem boring 060" over?	Noah Zarq	01/10/17 04:36 PM
Re: Any problem boring 060" over?	RapidRobert	01/10/17 04:41 PM
Re: Any problem boring 060" over?	Noah Zarq	01/10/17 04:54 PM
Re: Any problem boring 060" over?	70Cuda383	01/10/17 04:45 PM
Re: Any problem boring 060" over?	Noah Zarq	01/10/17 04:53 PM
Re: Any problem boring 060" over?	terzmo	01/10/17 05:03 PM
Re: Any problem boring 060" over?	B5 Bee	01/10/17 05:53 PM
Re: Any problem boring 060" over?	Noah Zarq	01/10/17 07:34 PM
Re: Any problem boring 060" over?	Noah Zarq	01/10/17 05:37 PM

Moderated by Al_Alguire, Hotwheelsjr, moparts, not_a_charger, RangerDan440, tboomer

Hop To