Originally Posted By 451Mopar
The issue I see with using a fixtured cam alignment hone, is it would take alot of time to setup the hone for each cam bore step, then knowing how much to hone without multiple tear-down/set-up of the fixture/hone tool to measure the bores?




It's one set up with however many different cam bores sizes there are.


The finish doesn't have to be honed if the tool is sharp, the speed and feed is correct and you don't crowd the machine.


Just because you think it won't make it true. Horsepower is KING. To dispute this is stupid. C. Alston