1 3/4 or 1 7/8 header ???? - Moparts Forums

Register Log In Moparts Forums Moparts Question and Answer 1 3/4 or 1 7/8 header ????

Print Thread

Re: 1 3/4 or 1 7/8 header ???? [Re: fast414] #2187872 11/02/16 02:49 AM 11/02/16 02:49 AM
Joined: Jan 2003 Posts: 27,421 Balt. Md 3 383man Too Many Posts
383man Too Many Posts 3 Joined: Jan 2003 Posts: 27,421 Balt. Md	I used to run almost the same combo as I had a 10.5 comp 440 with 906 heads and the MP .557 cam. I used an 850 Holley DP and the Holley Street Dominator intake. I used the Hedman 1-3/4 headers as my buddy gave me them with the car when I bought it. My 63 is all stock body and weighs just over 3700 lbs with me in it and it ran a best of 11.49 at 116 with that combo and the 1-3/4 Hedman headers. Ron Last edited by 383man; 11/02/16 02:51 AM.

Entire Thread
Subject	Posted By	Posted
1 3/4 or 1 7/8 header ????	fast414	10/30/16 05:00 PM
Re: 1 3/4 or 1 7/8 header ????	AndyF	10/30/16 05:07 PM
Re: 1 3/4 or 1 7/8 header ????	gdonovan	10/30/16 05:19 PM
Re: 1 3/4 or 1 7/8 header ????	RapidRobert	10/30/16 06:32 PM
Re: 1 3/4 or 1 7/8 header ????	DrCharles	10/30/16 05:10 PM
Re: 1 3/4 or 1 7/8 header ????	451Mopar	10/30/16 05:13 PM
Re: 1 3/4 or 1 7/8 header ????	gdonovan	10/30/16 05:18 PM
Re: 1 3/4 or 1 7/8 header ????	BlueRacer69	10/30/16 06:54 PM
Re: 1 3/4 or 1 7/8 header ????	71rm23	10/30/16 10:23 PM
Re: 1 3/4 or 1 7/8 header ????	gch	11/01/16 04:27 PM
Re: 1 3/4 or 1 7/8 header ????	Mr.Yuck	11/01/16 05:28 PM
Re: 1 3/4 or 1 7/8 header ????	383man	11/02/16 06:49 AM
Re: 1 3/4 or 1 7/8 header ????	Streetwize	11/03/16 02:23 PM

Moderated by Al_Alguire, Hotwheelsjr, moparts, not_a_charger, RangerDan440, tboomer

Hop To

Powered by UBB.threads™ PHP Forum Software 7.7.1