1 3/4 or 1 7/8 header ???? - Moparts Forums

Register Log In Moparts Forums Moparts Question and Answer 1 3/4 or 1 7/8 header ????

Print Thread

Re: 1 3/4 or 1 7/8 header ???? [Re: fast414] #2187339 11/01/16 01:28 PM 11/01/16 01:28 PM
Joined: Jan 2003 Posts: 24,562 Brookeville, Md Mr.Yuck Not enough dumb comments...yet
Mr.Yuck Not enough dumb comments...yet Joined: Jan 2003 Posts: 24,562 Brookeville, Md	I went from 1 3/4 to 1 7/8 on my old 440-6 set up, 588 solid roller, ported Stage VI heads, I picked up not et but did pick up 1mph.

Entire Thread
Subject	Posted By	Posted
1 3/4 or 1 7/8 header ????	fast414	10/30/16 05:00 PM
Re: 1 3/4 or 1 7/8 header ????	AndyF	10/30/16 05:07 PM
Re: 1 3/4 or 1 7/8 header ????	gdonovan	10/30/16 05:19 PM
Re: 1 3/4 or 1 7/8 header ????	RapidRobert	10/30/16 06:32 PM
Re: 1 3/4 or 1 7/8 header ????	DrCharles	10/30/16 05:10 PM
Re: 1 3/4 or 1 7/8 header ????	451Mopar	10/30/16 05:13 PM
Re: 1 3/4 or 1 7/8 header ????	gdonovan	10/30/16 05:18 PM
Re: 1 3/4 or 1 7/8 header ????	BlueRacer69	10/30/16 06:54 PM
Re: 1 3/4 or 1 7/8 header ????	71rm23	10/30/16 10:23 PM
Re: 1 3/4 or 1 7/8 header ????	gch	11/01/16 04:27 PM
Re: 1 3/4 or 1 7/8 header ????	Mr.Yuck	11/01/16 05:28 PM
Re: 1 3/4 or 1 7/8 header ????	383man	11/02/16 06:49 AM
Re: 1 3/4 or 1 7/8 header ????	Streetwize	11/03/16 02:23 PM

Moderated by Al_Alguire, Hotwheelsjr, moparts, not_a_charger, RangerDan440, tboomer

Hop To

Powered by UBB.threads™ PHP Forum Software 7.7.1