I have recently acquired a 63 plymouth B body station Wagon.

It is a 3 on the tree car. Engine and bell/flywheel are gone ( was a slant 6) but the trans/linkage/driveshaft are all still there.

I have a 413 big block that I want to run in this car. standard 6 bolt flange style crank.

I also have a 143 tooth flywheel and clutch from a 71 318 3 spd 1/2 ton truck. For that matter I have the trans and bell housing too. It was also a 3 on the tree.

The 318 is neutral balance like the 413, so for obvious economic reasons, I'd like to use the clutch and flywheel with my 413.

My question is, what bell housing can I use with this flywheel, and what BB applications would have had this bell housing?

Thanks