Originally Posted By Adam71Charger
I admit I like the 70's raised back end look, but I don't want to achieve it at a large sacrifice to handling. Usually I see this accomplished through really tall spring hangars and air shocks. I just did a spring relocation and a mini tub, and put in the mp Che springs. Unfortunately, the springs sit way lower than I had hoped. With a 15x10 wheels, and a mild 500ish hp 440, I don't want to much tire for the engine, so I think I should stick with 28's for now. What I'm getting at is the back end doesn't sit as high as I like. Is there any way to get it higher without changing the springs? I'd like to stay away from pump up air shocks


You've already compromised the handling by moving the springs inboard, raising like we did back then is only going to make the handling worse ...

Good luck in your quest.


running up my post count some more .