I modified a Chevy truck front bar for my 70 Charger. The 70-72 B body K member has the sway bar passing through the K like the 73-76 A body cars. My bar is 1.25" solid and came from a 73-87 Chevy 3/4 ton or 1 ton 2wd. I just had to shorten the ends and drill to mount end links.
$20 or so for the bar and $15 for a guy to drill the holes for the end links.
i was just thinking the set up you used. this could apply in this instance as well if the OP is willing, and has the time to look around and find something that could be made to work. i believe it would be in the true spirit of the lemons intent as well.
