4.360 bore w/ 440-1s with 2.25 valves, .760 lift? - Moparts Forums

Register Log In Moparts Forums Unlawfl's Race & Engine Tech 4.360 bore w/ 440-1s with 2.25 valves, .760 lift?

Print Thread

Re: 4.360 bore w/ 440-1s with 2.25 valves, .760 lift? [Re: WadeMetzinger] #2151165 09/09/16 05:23 PM 09/09/16 05:23 PM
Joined: Jan 2003 Posts: 5,762 Hot Rod Ridge FastmOp master
FastmOp master Joined: Jan 2003 Posts: 5,762 Hot Rod Ridge	My Valiant is .800 at 4.375

Entire Thread
Subject	Posted By	Posted
4.360 bore w/ 440-1s with 2.25 valves, .760 lift?	WadeMetzinger	09/09/16 09:13 PM
Re: 4.360 bore w/ 440-1s with 2.25 valves, .760 lift?	SCATPACK 1	09/09/16 09:22 PM
Re: 4.360 bore w/ 440-1s with 2.25 valves, .760 lift?	FastmOp	09/09/16 09:23 PM
Re: 4.360 bore w/ 440-1s with 2.25 valves, .760 lift?	Cab_Burge	09/09/16 11:37 PM
Re: 4.360 bore w/ 440-1s with 2.25 valves, .760 lift?	sgcuda	09/10/16 01:39 AM
Re: 4.360 bore w/ 440-1s with 2.25 valves, .760 lift?	Streetwize	09/12/16 04:03 PM

Moderated by Al_Alguire, Hotwheelsjr, moparts, not_a_charger, RangerDan440, tboomer

Hop To

Powered by UBB.threads™ PHP Forum Software 7.7.1