Ok, so I bought an '89 Ramcharger and I been have fixing a lot of things on it. Well, I'm in the process of fixing a pretty good trans leak, it is leaking between the trans tail housing and the transfer case. I got the transfer case off and there is a seal on the transfer case input shaft, and the gasket was there between the to cases, but there was not a seal in the trans output shaft. Should there be a seal on the output of the trans? It has the 318 and 727 with a 241 transfer case. It looks like it has been leaking for quite awhile now and the PO used a ton of RTV to try and seal it up.