Originally Posted By moparx
Originally Posted By GomangoCuda
Morosos threads gall.

i have found if you use just a tiny bit of anti-seize, galled threads are prevented. just a guess here, but i think the galling comes from the difference in the plating [or lack there of] differences between the studs and nuts. and to be clear, i torque my nuts to 85-100lbft. depending on the wheels being used and the nut type [cone or shank seat], and have no issues with them coming loose.
beer

Yep, if the plated ones are not lubricated the pIating tears off and basically welds the nut to the stud.

Last edited by GomangoCuda; 08/29/16 11:32 AM.
In theory, there is no difference between theory and practice. In practice, there is.