or if you have camshaft/engine building software program and dont mind typing in some info.. my software is not working..
i have or need the specs for this cam . I am wondering if i got it right.. Having a very hard time getting someone to grind it.. I was thinking if i change some numbers to make it easier to grind. I want to see if the new grind numbers makes a big difference. or change... if i have to change lobe profiles on this thing i want to see how much it hurts the power output.
368" smallblock 11.8-1 compression solid mech roller
INTAKE DUR.......@ .050 268 eXHAUST DURATION @.050..272 INT LOBE LIFT...........294 1.6 ROCKER EXHAUST LOBE LIFT.......313 1.5 ROCKER LOBE SEPARATION.........108 INT CENTER LINE.........104 EXHAUST CENTERLINE......112 INSTALLED AT............102 VALVE LASH..............015
Last edited by cheapstreetdustr; 08/25/16 03:02 PM.
365" Iron J heads,,3480lbs best 1.39 60ft on SS springs.10.54,124 mph ...6.67 1/8th et.average 60fts 1.46 w/ small cam &.063 no2 pill tagged & insured [image][/image]
|