Thanks Robert!

dug up some info for reference from a website..

We can't hide our passion for stock-looking musclecars from the 60's & 70's. Nothing beats that factory-fresh look like adding a set of steel wheels with dog-dish caps!

Produced back in "the days" by Kelsey-Hayes/Motor Wheel, the wheels we sell are the Real McCoy - genuine Kelsey-Hayes/Motor Wheel wheels. Not available new anymore, ours are originals that have been inspected, spun (to check trueness), shot-blasted to clean steel, then individually boxed. *They are not primered anymore because of many requests - many people have them powder coated which would require stripping again. When you pull one out of the box, what you'll have is an original Kelsey-Hayes/Motor Wheel wheel as close to new as possible. **NOTE: Shot-Blasting leaves the steel grainy - some sanding will be required & then primer will fill the rest of the grain.

Features:

Multiple wheels will always match each other
Wheels are guaranteed to balance with normal weighting
Mopar wheels 1968 & newer accept the smaller Dog-Dish caps (9" OD). Mopar wheels 1967 & earlier use the larger Dog-Dish caps (10-1/4" OD). We can supply both types of Mopar wheels.
All Mopar and Ford wheels are 5-hole on 4.5" center (large) bolt pattern. (Sorry - no A-Body mopar wheels)
GM wheels are 5-hole on 4.3/4" center
(GTO, 442, Camaro, Chevelle, Firebird, Corvette, etc.)
Lug holes will not be oblong or chewed-up
If you are using aftermarket disc brake setups, we cannot guarantee factory wheels to fit over the aftermarket calipers.