Originally Posted By moparjoe360.4
Here is the reason I need new pistons. I really don't think that they should fail like this after 25k mi. Even with a few hundred passes.


You butted the rings which blew the ring land off. Your end gap must have been correct or close to run 25,000 miles though. You were running hot with borderline fuel or just didn't lift when it was rattling. Was your top ring @ .026-.028"?

You won't beat the Mahle's with their tighter than normal clearances for a forging. J.Rob


2009 PHR\EMC Competitor
2010 PHR\EMC Competitor
2011 PHR\EMC Competitor
2012 PHR\EMC Competitor
2013 PHR\EMC Competitor
2014 HotRod/EMC Competitor
2015 HotRod/EMC NoShow
2016 HotRod/EMC 3rd place SPEC Bigblock
2018 HotRod/EMC 7th place G3