How do I properly paint parts after bead blasting?

Print Thread

Re: How do I properly paint parts after bead blasting? [Re: mikeporp] #2116625 07/24/16 01:35 PM 07/24/16 01:35 PM
Joined: May 2014 Posts: 128 pa M mikeporp OP member
mikeporp OP member M Joined: May 2014 Posts: 128 pa	I also just acquired an original 70 air compressor. I'm going to be putting the a/c components back on. Any tips on what I should do with this to get it looking good. Bead blasting or no? 1970 challenger convertible

Entire Thread
Subject	Posted By	Posted
How do I properly paint parts after bead blasting?	mikeporp	07/23/16 02:59 PM
Re: How do I properly paint parts after bead blasting?	DAYCLONA	07/23/16 03:22 PM
Re: How do I properly paint parts after bead blasting?	DaveRS23	07/23/16 03:46 PM
Re: How do I properly paint parts after bead blasting?	mikeporp	07/23/16 03:53 PM
Re: How do I properly paint parts after bead blasting?	screamindriver	07/23/16 05:16 PM
Re: How do I properly paint parts after bead blasting?	John_Kunkel	07/23/16 07:14 PM
Re: How do I properly paint parts after bead blasting?	5wndwcpe	07/24/16 04:05 AM
Re: How do I properly paint parts after bead blasting?	mikeporp	07/23/16 08:06 PM
Re: How do I properly paint parts after bead blasting?	Stanton	07/23/16 08:34 PM
Re: How do I properly paint parts after bead blasting?	dart4forte	07/23/16 10:19 PM
Re: How do I properly paint parts after bead blasting?	Stanton	07/23/16 11:05 PM
Re: How do I properly paint parts after bead blasting?	Challenger 1	07/25/16 01:25 PM
Re: How do I properly paint parts after bead blasting?	Stanton	07/24/16 03:29 PM
Re: How do I properly paint parts after bead blasting?	mikeporp	07/24/16 05:35 PM
Re: How do I properly paint parts after bead blasting?	Stanton	07/24/16 06:56 PM
Re: How do I properly paint parts after bead blasting?	mikeporp	07/25/16 02:35 PM
Re: How do I properly paint parts after bead blasting?	clonedshaker+6	07/28/16 01:27 AM
Re: How do I properly paint parts after bead blasting?	Imrare	08/05/16 06:13 PM

Hop To