Pull the black cover off the choke linkage and see if the coil spring has a loop on the end of it for the pin to the choke linkage, if so when you reassemble it make sure the pin goes into the loop and then adjust the cover so it closes the choke blades all the way when cold.If it has a L shape on the end of the spring put it against the pin so it will close the choke when adjusted properly scope Align the line on the choke cover with the matching lines on the choke housing scope
Let us know how you do and if that wokrs or not work

Last edited by Cab_Burge; 07/14/16 02:36 PM.

Mr.Cab Racing and winning with Mopars since 1964. (Old F--t, Huh)