|
Re: Machinists, removing pistons from press fit rods
[Re: Bad340fish]
#207550
01/31/09 12:43 AM
01/31/09 12:43 AM
|
Joined: Oct 2003
Posts: 3,698 NE Oklahoma
Von
OP
master
|
OP
master
Joined: Oct 2003
Posts: 3,698
NE Oklahoma
|
Quote:
[Tudors machine in Tulsa can do it i believe. My friend blew up a 350 a few years ago that had KB hyper pistons in it, they had a fixture to support the rod and not put pressure on the piston. This was years ago tudors may not even be around anymore.
Thanks for the reply. FWIW, Ive never heard of Tudors, but I'll see if I can fine em.
Thanks
72 RR, Pump gas 440, 452s, 3800 lbs, Corked, ET Radials,. 11.33@117.72.
Same car, bone stock 346s, 9.5 comp, baby solid. 12.24@110.
|
|
|
Entire Thread
|
Machinists, removing pistons from press fit rods
|
Von
|
01/29/09 02:46 PM
|
Re: Machinists, removing pistons from press fit rods
|
GODSCOUNTRY340
|
01/29/09 02:59 PM
|
Re: Machinists, removing pistons from press fit rods
|
Quicktree
|
01/29/09 03:06 PM
|
Re: Machinists, removing pistons from press fit rods
|
Moparnut426
|
01/29/09 03:12 PM
|
Re: Machinists, removing pistons from press fit rods
|
HemiRick
|
01/29/09 04:35 PM
|
Re: Machinists, removing pistons from press fit rods
|
MR_P_BODY
|
01/29/09 05:56 PM
|
Re: Machinists, removing pistons from press fit rods
|
therocks
|
01/29/09 10:29 PM
|
Re: Machinists, removing pistons from press fit rods
|
64dodge440
|
01/30/09 01:10 AM
|
Re: Machinists, removing pistons from press fit rods
|
SSDA3426
|
01/30/09 01:31 AM
|
Re: Machinists, removing pistons from press fit rods
|
Defbob
|
01/30/09 12:25 PM
|
Re: Machinists, removing pistons from press fit rods
|
mopardamo
|
01/30/09 02:44 PM
|
Re: Machinists, removing pistons from press fit rods
|
CompWedgeEngines
|
01/30/09 02:56 PM
|
Re: Machinists, removing pistons from press fit rods
|
Bad340fish
|
01/31/09 01:11 AM
|
Re: Machinists, removing pistons from press fit rods
|
Von
|
01/31/09 04:43 AM
|
Re: Machinists, removing pistons from press fit rods
|
Bad340fish
|
01/31/09 05:36 AM
|
Re: Machinists, removing pistons from press fit rods
|
360view
|
01/31/09 02:51 PM
|
|
|
|
|