Machinists, removing pistons from press fit rods

Print Thread

Re: Machinists, removing pistons from press fit rods [Re: Von] #207546 01/30/09 08:25 AM 01/30/09 08:25 AM
Joined: Nov 2004 Posts: 3,619 Norwich CT USA Defbob master
Defbob master Joined: Nov 2004 Posts: 3,619 Norwich CT USA	torch, press and a pin just smaller than the wrist pin my oldsmobile has press pins

Entire Thread
Subject	Posted By	Posted
Machinists, removing pistons from press fit rods	Von	01/29/09 02:46 PM
Re: Machinists, removing pistons from press fit rods	GODSCOUNTRY340	01/29/09 02:59 PM
Re: Machinists, removing pistons from press fit rods	Quicktree	01/29/09 03:06 PM
Re: Machinists, removing pistons from press fit rods	Moparnut426	01/29/09 03:12 PM
Re: Machinists, removing pistons from press fit rods	HemiRick	01/29/09 04:35 PM
Re: Machinists, removing pistons from press fit rods	MR_P_BODY	01/29/09 05:56 PM
Re: Machinists, removing pistons from press fit rods	therocks	01/29/09 10:29 PM
Re: Machinists, removing pistons from press fit rods	64dodge440	01/30/09 01:10 AM
Re: Machinists, removing pistons from press fit rods	SSDA3426	01/30/09 01:31 AM
Re: Machinists, removing pistons from press fit rods	Defbob	01/30/09 12:25 PM
Re: Machinists, removing pistons from press fit rods	mopardamo	01/30/09 02:44 PM
Re: Machinists, removing pistons from press fit rods	CompWedgeEngines	01/30/09 02:56 PM
Re: Machinists, removing pistons from press fit rods	Bad340fish	01/31/09 01:11 AM
Re: Machinists, removing pistons from press fit rods	Von	01/31/09 04:43 AM
Re: Machinists, removing pistons from press fit rods	Bad340fish	01/31/09 05:36 AM
Re: Machinists, removing pistons from press fit rods	360view	01/31/09 02:51 PM

Hop To