Originally Posted By madscientist
If mr PBody can't find his ill see if I still have mine.

If you are using aluminum rods and have an old junk one, it's easy to make one from it. I just make a drill sleeve if using an aluminum cap.

Pretty easy to make on with a steel cap too, you just have to lay it out.


Thats all mine is... just a cap but I torque the cap
with the bearings in it each time and drill just the
one bearing... mine just happens to be a production
Viper rod
wave

Last edited by MR_P_BODY; 05/15/16 04:53 PM.