Switch is good, 12v incomming is good, 12v(thick) red is good. It acts like im not signaling thru the distributor pick up.
With the test you did(jumping the box side of the dist) thats what the test says also... I just went through this last week.. but when I jumped the box side it had a spark at the coil lead just 1 time then nothing.. my coil was shot... after changing the coil.. it runs better than it ever has
I swapped out a blaster ss and tried blaster 2, no luck. I went through the troubleshooting guide that came with it and also their website. I ohmed out the distributor and got .287 on the 2k scale.
