Experience with Cast SCAT 4" with 318/340 Mains

Print Thread

Re: Experience with Cast SCAT 4" with 318/340 Mains [Re: HotRodDave] #2036536 03/22/16 03:56 PM 03/22/16 03:56 PM
Joined: Jan 2003 Posts: 2,077 Oklahoma City Jwilli500 OP top fuel
Jwilli500 OP top fuel Joined: Jan 2003 Posts: 2,077 Oklahoma City	Hot Rod Dave, did you have to use mallory metal? Thanks for the responses guys!

Entire Thread
Subject	Posted By	Posted
Experience with Cast SCAT 4" with 318/340 Mains	Jwilli500	03/17/16 07:19 PM
Re: Experience with Cast SCAT 4" with 318/340 Mains	RapidRobert	03/18/16 03:12 PM
Re: Experience with Cast SCAT 4" with 318/340 Mains	Polarapete	03/18/16 06:39 PM
Re: Experience with Cast SCAT 4" with 318/340 Mains	Jwilli500	03/18/16 07:18 PM
Re: Experience with Cast SCAT 4" with 318/340 Mains	dogdays	03/18/16 08:20 PM
Re: Experience with Cast SCAT 4" with 318/340 Mains	Jwilli500	03/18/16 08:43 PM
Re: Experience with Cast SCAT 4" with 318/340 Mains	Jwilli500	03/18/16 08:50 PM
Re: Experience with Cast SCAT 4" with 318/340 Mains	HotRodDave	03/18/16 09:12 PM
Re: Experience with Cast SCAT 4" with 318/340 Mains	Jwilli500	03/22/16 07:56 PM
Re: Experience with Cast SCAT 4" with 318/340 Mains	autoxcuda	03/22/16 09:29 PM
Re: Experience with Cast SCAT 4" with 318/340 Mains	Jwilli500	03/23/16 07:44 PM
Re: Experience with Cast SCAT 4" with 318/340 Mains	autoxcuda	03/23/16 08:48 PM
Re: Experience with Cast SCAT 4" with 318/340 Mains	Jwilli500	03/28/16 07:59 PM
Re: Experience with Cast SCAT 4" with 318/340 Mains	autoxcuda	03/28/16 08:47 PM
Re: Experience with Cast SCAT 4" with 318/340 Mains	HotRodDave	03/22/16 09:32 PM

Hop To