I was wondering what's your engine combo, rear gear and power your putting out? Those are nice times for a heavy car.
The engine is a stock block with main studs-line honed, decked, bored to 4.350 with 440 source rotating assy. Comes in right at 10.4 compression.
Edelbrock Rpm heads just cleaned up a little by me and a Victor portmatched intake. Cam is a Comp 640-648 (w/ 1.6 Harland sharps) at 268-272 dur at .050" degreed at 106 . I run a 1050 dominator 2 circuit conversion. It has Hooker super comps 2" headers.
4.30 rear gear with MT et drags 28/11.5 - 15 rears.
Thanks for asking.
