Originally Posted By MR_P_BODY
You cut that tank open for no reason..
you just needed to make a different mount
for the pump... the large part of the pump
would fit in so if you made the mount to fit
above the large dia you could have made it
work.. I've done many mounts with closer
clearances(a partial rap around of sheet metal
would have worked)
wave


Yes that could have been done, with a separate return, but would have been 10lbs of stuff mushed through a 1lb tube. I like the access I have now and I gained new appreciation for welding sheet metal. I also still have the option for a second pump.