M&M Intake Manifold for W8/W9's - Moparts Forums

Register Log In Moparts Forums Unlawfl's Race & Engine Tech M&M Intake Manifold for W8/W9's

Print Thread

Re: M&M Intake Manifold for W8/W9's [Re: 1967dartgt] #1941492 10/30/15 02:18 AM 10/30/15 02:18 AM
Joined: Jan 2003 Posts: 6,151 Melbourne , Australia LA360 master
LA360 master Joined: Jan 2003 Posts: 6,151 Melbourne , Australia	The general architecture for the Sb2.2 and P7 heads is for a single 4 brl. The casting for the outer runners angle in toward the centre for a 4 brl intake. Not the best scenario for a dual 4brl intake, Alan Jones

Entire Thread
Subject	Posted By	Posted
M&M Intake Manifold for W8/W9's	Plumb Wired	10/28/15 07:02 AM
Re: M&M Intake Manifold for W8/W9's	1967dartgt	10/28/15 10:02 PM
Re: M&M Intake Manifold for W8/W9's	1967dartgt	10/28/15 10:12 PM
Re: M&M Intake Manifold for W8/W9's	Leon441	10/30/15 02:23 AM
Re: M&M Intake Manifold for W8/W9's	1967dartgt	10/30/15 04:36 AM
Re: M&M Intake Manifold for W8/W9's	LA360	10/30/15 06:18 AM
Re: M&M Intake Manifold for W8/W9's	WHITEDART	10/30/15 04:14 AM
Re: M&M Intake Manifold for W8/W9's	fishy340	10/30/15 02:47 PM

Moderated by Al_Alguire, Hotwheelsjr, moparts, not_a_charger, RangerDan440, tboomer

Hop To

Powered by UBB.threads™ PHP Forum Software 7.7.1