M&M Intake Manifold for W8/W9's - Moparts Forums

Register Log In Moparts Forums Unlawfl's Race & Engine Tech M&M Intake Manifold for W8/W9's

Print Thread

Re: M&M Intake Manifold for W8/W9's [Re: Plumb Wired] #1941307 10/29/15 10:23 PM 10/29/15 10:23 PM
Joined: Nov 2004 Posts: 4,330 Lynchburg, VA Leon441 master
Leon441 master Joined: Nov 2004 Posts: 4,330 Lynchburg, VA	Totally different intakes. The SB2 and P7 is limited to the intake ports in heads are turned to work with single 4 manifolds. They have cylinder balance issues, I'm told. W8 should not have these issues, Mike. Career best 8.02 @ 169 at 3050# and 10" tires small block power.

Entire Thread
Subject	Posted By	Posted
M&M Intake Manifold for W8/W9's	Plumb Wired	10/28/15 07:02 AM
Re: M&M Intake Manifold for W8/W9's	1967dartgt	10/28/15 10:02 PM
Re: M&M Intake Manifold for W8/W9's	1967dartgt	10/28/15 10:12 PM
Re: M&M Intake Manifold for W8/W9's	Leon441	10/30/15 02:23 AM
Re: M&M Intake Manifold for W8/W9's	1967dartgt	10/30/15 04:36 AM
Re: M&M Intake Manifold for W8/W9's	LA360	10/30/15 06:18 AM
Re: M&M Intake Manifold for W8/W9's	WHITEDART	10/30/15 04:14 AM
Re: M&M Intake Manifold for W8/W9's	fishy340	10/30/15 02:47 PM

Moderated by Al_Alguire, Hotwheelsjr, moparts, not_a_charger, RangerDan440, tboomer

Hop To

Powered by UBB.threads™ PHP Forum Software 7.7.1