Tublar A Arm measurements needed

Print Thread

Tublar A Arm measurements needed #1931913 10/14/15 10:37 AM 10/14/15 10:37 AM
Joined: Feb 2012 Posts: 368 michigan turbo toad OP enthusiast
turbo toad OP enthusiast Joined: Feb 2012 Posts: 368 michigan	I have a set of unknown manufacturer tublar A Arms im in the process of installing in my 62 valiant im upgrading the brake system from SBP KH setup to a LBP brake setup. The arms i have have a poly mount that are dry rotted and need to be replaced before i install the arms im going to replace them with a heim joint end and im in need of the measurement of the spacers used in between the A arm ends and mounting ears on the frame that the eccentric bolts pass thru. Any and all help is always appreciated Thanks Last edited by turbo toad; 10/14/15 01:24 PM. Check out my build on Facebook Ttoad Hurley its updated regularly

Entire Thread
Subject	Posted By	Posted
Tublar A Arm measurements needed	turbo toad	10/14/15 02:37 PM
Re: Tublar A Arm measurements needed	turbo toad	10/14/15 03:01 PM

Hop To