Looking at hooking up the manual choke linkage on my 71 charger. Engine is a 440 and I have a Edelbrock 1407 on it. The guy that had it before me had all this disassembled before I bought it. Looking at the Carb I am pretty sure that #1 on the picture is where the choke cable is held in place. #2 is where the inner choke cable should be attached. My question on #2 is what is the proper way to attach the inner choke cable to this spot. #3 on the carb I don't think is related to the choke cable.
![](http://i40.photobucket.com/albums/e218/chargerag/IMAG0848%20Numbered_zps8afylbjg.jpg)
Second question is a weird one. I can't figure out where the choke cable goes through the firewall. I would think it goes in a straight line between where the cable is attached inside the car and the carb but I don't see anything on the wall that makes sense.
![](http://i40.photobucket.com/albums/e218/chargerag/IMAG0849_zps9rxjbfky.jpg)