Beautiful engine drool

I have a DLI kit on a 440 and its a torq. beast.
Makes 3 or 6lbs boost depending on pulleys.
Current cam is a Comp Hyd. 231/237@.050 .525/110cl.
Tried the Summit 6401 224/234@.050 114cl. I want try it again.
And MP .509/114cl cam.
With the comp cam it ran a traction limited 11.35@120mph. @ 4,800 rpm. 3.33 rear gears.

They use ALOT of fuel, double 3/8ths lines 2 pumps.
But I found that it still was lean,12.8 AFR.Eventually figured out it was the metering blocks. Drilled the main wells to .177 and AFR went from 12.3 to 10.4 with the SAME jets.

So really nice set-up you are building,,nice work up bow

new 1050 carb.jpgnew 1050 carb.jpg
70` Cuda`,440 6BBL Jerico,Dana 4.56 Still on 93 Pump Gas
9.87 @ 136/1.31-60ft.`09 Mopar Nationals PASSON PERFORMANCE "Stick-Shift" Champ!
2013 StickShift Challenge Winner@ Mopar Nationals!