Originally Posted By MarkM

The adapters to mount generation 1 Viper calipers to 73+ disk brake spindles on 11.75" rotors?



Viper calipers on B-body rotors will require a spacer behind the brake pads.
Viper calipers on C-body/D150/B150 rotors will require a different outer bearing. I haven't dug around to see if the bearing exists or if a spindle sleeve will be required.

Either set will require careful measuring to be sure the caliper will not contact the wheel.

I think Dr Diff bailed on this application due to low sales.



Building the parts isn't hard, it just takes a little time on manual machines. I've done more challenging conversions.



We are brothers and sisters doing time on the planet for better or worse. I'll take the better, if you don't mind.
- Stu Harmon