I was bummed at Hotchkis because they were having a lot of timing issues. Twice I ran a great lap only to have the clock not stop. The run that shows 51 seconds was actually a 28.190, good enough for second, .1 out of first.

They do weld cracks if nec.

These 18x10.5 have a +42 offset. I run the 8.8 so I don't use much spacer on back, looks like a 7/16 will be good if I get the rear end perfectly centered and the leafs in 1/2 inch. The front will be tough, these Rival S 315 tires are wide. I'm hoping if I mill the Córdoba hub I can run no or little spacer, and get minimal rubbing inside....