Grinding for stroke clearance with 4.5" crank

Print Thread

Re: Grinding for stroke clearance with 4.5" crank [Re: turbobitt] #183705 01/05/09 10:29 AM 01/05/09 10:29 AM
Joined: Mar 2008 Posts: 573 PA 68CudaB1 mopar
68CudaB1 mopar Joined: Mar 2008 Posts: 573 PA	Our World Alum block w/ 4.625 stroke and Oliver steel rods was fine as far as block clearance.

Entire Thread
Subject	Posted By	Posted
Grinding for stroke clearance with 4.5" crank	turbobitt	01/04/09 06:20 PM
Re: Grinding for stroke clearance with 4.5" crank	602heavy	01/04/09 08:24 PM
Re: Grinding for stroke clearance with 4.5" crank	Al_Alguire	01/04/09 08:28 PM
Re: Grinding for stroke clearance with 4.5" crank	Cab_Burge	01/04/09 11:21 PM
Re: Grinding for stroke clearance with 4.5" crank	turbobitt	01/05/09 02:07 AM
Re: Grinding for stroke clearance with 4.5" crank	Bob_Coomer	01/05/09 03:48 AM
Re: Grinding for stroke clearance with 4.5" crank	Al_Alguire	01/05/09 07:07 AM
Re: Grinding for stroke clearance with 4.5" crank	68CudaB1	01/05/09 02:29 PM

Hop To